Shiv Traders

C steel angle is hot rolled steel or high strength low alloy steel bars shaped to a 90 degree 'L' shaped bar. The sides or legs of the “L” may be equal or unequal. Other names for carbon steel angle are angle irons or steel angle bars.

Mild Steel Angle Hot Rolled is an angle shaped, hot rolled mild steel. Hot rolled steel is formed through a metal rolling process where the steel is pressed at temperatures above the its recrystallization threshold.

Hot rolled steel is steel that has been roll-pressed at very high temperatures—over 1,700˚F, which is above the re-crystallization temperature for most steels. This makes the steel easier to form, and resulting in products that are easier to work with

Mild Steel Angle Galvanized is an angle shaped mild steel that has been galvanized. The process of hot-dip galvanizing steel products adds a thin layer of zinc. This is achieved by passing the steel through a molten bath of zinc at a temperature of around 860 °F (460 °C).

An MS angle, also known as a Mild Steel angle, is a cross-section with an L shape that is used in building several projects of houses and buildings. The far more common Mild Steel angles are those that form a 90-degree angle with two sides that are equal in length and width.

Mild Steel Angle Galvanized is an angle shaped mild steel that has been galvanized. The process of hot-dip galvanizing steel products adds a thin layer of zinc. This is achieved by passing the steel through a molten bath of zinc at a temperature of around 860 °F (460 °C)

Stainless steel angles, both laser fused and hot rolled, are a popular structural shape that see many uses and applications in the steel industry. Stainless Structurals can produce angle sizes from a 3/16” thickness all the way up to a 1.5” thickness with a full penetration weld.